a large multi-purpose semi muffle gas fired kiln for both the professional and student user. The LN2000 provides controlled heat up to a maximum temperature in excess of 1100°C.
VERSATILE
The LN2000 Gas Fired Kiln has many uses including pottery metal heat treatment, enamelling, melting precious metals and wax burn-outs. Aswell as it’s use in education this kiln is used in dental laboratories and in the manufacture of jewellery.
FAST
The LN2000 Kiln reaches 850°C in only 10 minutes and 1100°C in 30 minutes.
CHAMBER DIMENSIONS
Width 300mm . Depth 340mm . Height 300mm
SIMPLE TO INSTALL AND MAINTAIN
Designed for use in well ventilated areas the LN2000 runs on natural gas or bottled gas (LPG).
LARGE SIZED CHAMBER
Flush fitting chamber-sized door permits full use of all of the chamber volume.
SAFETY FEATURES
Piezo Spark Ignition - eliminates lighting problems.
Flame Failure Device - no flame - no gas.
Heat Control Valve - simple, safe temperature control.
Temperature Indicator - up to 1600°C.
All these are fitted as standard.
EFFICIENT IN USE
The constant heat input and space-age insulation produce a stable
operating temperature with minimum gas usage.
GAS RATE PRESSURES
Natural Gas |
0.6m 3/h 20 mbar |
Propane |
0.46kg/h 35 mbar |
Butane |
0.46kg.h 28 mbar |
WEIGHT
47Kgs.
ENAMELLING
Designed for the professional or student enameller the fast
heat up times allow enamelling to begin within 10 minutes. Large
capacity and even heat distribution allow larger objects to be
enamelled. The top outer casing of the kiln heats up sufficiently
to enable the drying of
enamels to be carried out.
METAL HEAT TREATMENT
The LN2000 is ideal for heat treatment, hardening, case hardening
and tempering of tools and components. The kiln,s maximum temperature
of over 1100°C quickly melts
small quantities of metal e.g. aluminium and brass.
WAX BURNOUTS
Superb for the investment casting process the kiln provides good capacity and a clean burn with excellent ventilation. The heat control valve provides controlled even heat up to 1100°C.
MELTING PRECIOUS METALS
The LN2000 is ideal for melting small amounts of precious metals in a short space of time. A solid refractory base tile easily accommodates a large range of metal melting crucibles for melting gold, silver and other precious metals.
LABORATORY USE
The LN2000 is a good general semi muffle gas fired kiln which provides controlled heat up to a maximum temperature in excess of 1100°C in 30 minutes.
POTTERY
The LN2000 is ideal for glazing small single items of pottery. Glazing is usually done at just over 1000°C. Decorating pottery before glazing is difficult as many of the colours used will not stand up to the high temperatures used in glazing. Most decorating is done after glazing and then re-glazed and enamel fired at around 750°C.
DENTAL WORK
A multi purpose gas fired kiln that is safe, clean, fast and
with controllable temperature.
The LN2000 is ideal for:
- Gold Casting (inlays and dentures)
- Heating rings for porcelain bonding to gold and non-precious alloys.
- Cobolt chrome dentures.
Please state type of gas when ordering
According to the Health & Safety at Work Act 1974, BS 4163 and COSHH Regulations it is mandatory that all fumes must be removed at source.
