To go from design concept to finished manufactured product in one lesson – without leaving the classroom.
Imagine a situation when pupils can see a complete process from concept to completion in one lesson and the impact it will have on their understanding and results.
You can - with the Low Temperature Casting System.
- Pewter Casting in a simple and safe process
- Thermostatically Controlled
- No lengthy preparation times
- Fully operable in 15 minutes
- Completely mobile
Flamefast have always been at the forefront of Hot Metal equipment design for education. The LT1 Low Temperature Casting System has been designed to create unique links between Design & Technology and other curriculum areas such as ICT and Art. At the same time it offers a cost effective and safe method for casting and moulding lessons.
The LT1 allows casting and moulding to be undertaken in a standard classroom environment away from traditional workshop areas.
The system is simple, easy and safe to use requiring only a standard 13amp 230VAC socket. It does not require any extraction system.
It has been designed so that pupils can observe safely the physical processes of melting and pouring metals.
The unique cooling system keeps the entire case cold to touch. The internal melting pot has a clearly labelled swivel lid for observing the state of the molten metal and adding new material.
The LT1 is thermostatically controlled which enables the pewter or lower temperature alloy to be held at a constant temperature not requiring any user intervention.
There are no lengthy set up times. A typical total ready to use time is 15 minutes from first switching the system on. Lesson plans are simple (schemes of work being available from the Flamefast Website). Risk Assessment is clear.
The system is designed to use Lead Free metals including Pewter, which melts at approx 245degreesC, and also a lower melting point alloy which has a melting point of 137degreesC. These allow the use of moulds which have been manufactured in vulcanised rubber, MDF, soap, woods, Cuttle Fish and many other materials.
Moulds can easily be made by hand or using CNC milling techniques. Alternatively, pre-made moulds can be purchased separately along with the Pewter and Lower Melting Point Alloy.
Performance
- 240VAC @ 6 amps continuous
- Max temperature 260degreesC
- 2.3Kg Crucible capacity for Lead Free Pewter
- Thermostatically controlled at either 250degreesC or 150degreesC
Standard Supply
- Low Temperature casting unit
- Mould Holder and clip
- 5 sticks Lead Free Pewter
- Selector Switch for High/Low Temperature Control
- 1 MDF mould
- Spill tray
Optional Extras
Vulcanised Rubber Moulds including
- Tudor King & Queen
- World War One Soldier
- Roman Soldier
- Pendant Pig
- Pendant Teddy
- Lead Free Pewter
- MCF Low Melting Point Alloy
Maximum Mould Size
100mm x 100mm x 30mm in the mould holding device. Larger sizes
can be achieved without the use of the mould holding device.
