The Adapto Pencil Torch is a precision instrument with multiple usage. It is ideal for dental work, modelmaking and all soft soldering projects.
The Adapto Pencil Torch is for use only with Natural Gas and provides a long thin flame which is ideal in situations where high heat is not required. The Jet of pure natural gas entrains the adjacent air for complete combustion. No air pump or blower fan is required.
The needle valve precisely controls the flame length of up to 80mm. The torch will operate in any attitude. The solid, stable base gives static positions of 30, 60 or 90 degrees.
HAND HELD
The Pencil Torch has an insulated stainless steel barrel which remains cool during intense use making it ideal for hand held use.
MULTIPLE USE
The Adapto Pencil Torch was designed prImarily for Flame-brushing wax moulds by dental technicians but has been found to be ideally suited for many other uses including soft soldering and small silver soldering projects.
MAXIMUM HEAT RATING
Natural Gas 500Btu. 0.15Kw
OPERATING GAS PRESSURES
Natural Gas 20 mbar
ELECTRICS
An electric supply is not needed for the operation of the Pencil Torch.
STANDARD EQUIPMENT
- Aluminium Base
- Flexible tubing
- Adaptor
IMPORTANT SAFETY NOTE
The Needle valve which controls the flame length is not an Isolating Valve. The gas supply should be turned off whenever the torch is left unattended.
According to the Health & Safety at Work Act 1974, BS 4163
and COSHH Regulations it is mandatory all fumes must be removed
at source.
