EM221 & EM222 Jewellery Benches

EM221 & EM222 Jewellery Benches

Flamefast offer a choice of two of the finest quality twin position jewellery benches both of which are fitted with gas torches selected from the Flamefast range. Continue reading

Specifications

  • Model EM221 / EM222
  • Size (cm) 200 X 60.5 X 75.6H
  • Net Weight (kg) N/A
  • Gross Weight (kg) N/A

More Info

Description

Jewellery Benches are supplied factory fitted with gas/air manifold, gas and air supply non-return` valves and jewellery torches.

Installation is simple, requiring only a gas connection and an electricity supply point. All Flamefast Jewellery Benches operate with the unique RF10 Jewellery Torch, which automatically supplies the correct gas/air mixture with the turn of one single control valve. This is convenient to any operator, but in particular will give confidence to younger students and will enable them to produce a higher standard of work in a shorter space of time. In addition to the RF10 Jewellery Torch, the EM222 Bench has each work place fitted with the very popular Needleflame torch. As the name suggests, the torch produces a fine needle-like flame, ideal for the silver soldering work generally found with jewellery work.

The torch can be held in the hand like a pen or placed in the three position stand with work being held in a gloved hand and brought to the flame. Quietness of operation is essential both when instructing students and in the professional environment. Flamefast benches are fitted with the famous ‘whisper quiet’ blower fan, which is specially designed to provide combustion air for the soldering torches. All benches are manufactured from the finest quality seasoned timbers. The bench top is made from 50mm thick solid beech.

*Picture is for reference only and may differ from the final product

Key Features

  • Gas/air manifolds rear and front and 9MS8 Blower Fan - single phase
  • Flexible approved gas hose for connection with non-return valve fitted to gas inlet with double solenoid
  • 2 Adapto RF10 jewellery torches with colour coded reinforced gas and air hoses
  • Adapto needle flame torches with colour coded gas and air hoses and three position stand (2 for EM 222 only)
  • Range of optional extras available

Downloads

View FileEM221 & EM222 Jewellery Benches

Videos

There are currently no videos available for the product.

Additional Info

TOTAL GAS PERFORMANCE (Please state gas type when ordering)

GAS TYPE RATE PRESSURE
Natural Gas 0.54 m3/h 20 mbar
Propane 0.42 kg/h 35 mbar
Butane 0.42 kg/h 28 mbar
Units for other types of gas can be supplied. Please ask for details
Electrics 120 Watts - 220 - 240 volts single phase

Standard Equipment

  • 2 RF10 Jewellery torches with colour coded reinforced gas and air hoses
  • Flexible approved gas hose for connection
  • Double solenoid and non-return valve fitted to gas inlet
  • Gas/air manifolds rear and front
  • 9MS8 Blower
  • Torch support stand to suit
  • No volt starter


Optional Extras

  • 300 mm diameter revolving brazing table
  • Carton on 10 or 20 heat reflective block
  • Non asbestos heat resistant protective sheet for bench top surround

Case Studies

Extras

Need some help?

Make an Enquiry

* Required Fields

Workshop Solutions

Workshop Solutions

Hot Metal & Foundry Equipment

Hot Metal & Foundry Equipment

After Care Services

After Care Services