DS430D Combined Chip Forge and Double Brazing Hearth

DS430D Combined Chip Forge and Double Brazing Hearth

The DS430D is a combined Ceramic Chip Forge and Double Brazing Hearth with fail-safe controls, ideal for when space is limited. Continue reading

Specifications

  • Model DS430D (with Varivac hood)
  • Size (cm) 140 X 55 X 180H
  • Net Weight (kg) N/A
  • Gross Weight (kg) N/A
  • Model DS430D (without Varivac hood)
  • Size (cm) 140 X 55 X 100H
  • Net Weight (kg) N/A
  • Gross Weight (kg) N/A

More Info

Description

The forge has a single phase whisper quiet integral fan to provide the air supply and takes only 15 minutes to reach working temperature. It can reach a temperature of 1,500°C. It has a 340mm diameter working area and can work up to 50mm steel bar. The ceramic chip technology minimises surface scale formation.

The brazing hearths both have an area of 0.23 square metres with heavy duty refractory bases. One or both of the RF80 brazing torches, which deliver up to 80,000BTU of heat output, can be replaced by Flamefast RF10 jewellery torches for fine work. All Flamefast RF torches have a single hand-wheel control to give ease of flame control and a constant flame pattern over the range of flame sizes. The torches are ignited electronically.

As with all Flamefast equipment, the DS430D Chip Forge/Double Brazing Hearth is covered by the Flamefast unconditional 2-year warranty.

*Picture is for reference only and may differ from the final product

Key Features

  • Especially useful where space limitations are a consideration
  • Unit consists of a ceramic chip forge and two brazing hearth usually equipped with 2 Flamefast RF80 brazing torches
  • Can be run on either Natural Gas or LPG bottled gas
  • Shown with Varivac extraction canopy
  • Optional extras available

Downloads

View FileDS430D Combined Chip Forge and Double Brazing Hearth

Videos

There are currently no videos available for the product.

Specifications / Additional Info

TOTAL GAS PERFORMANCE (Please state gas type when ordering)

GAS TYPE RATE BTU/HRS KW PRESSURE
Natural Gas 6.66 m3/h 245 000 71.8 20 mbar
Propane 5.1 kg/h 245 000 71.8 35 mbar
Butane 5.2 kg/h 245 000 71.8 28 mbar
Electrics 120 Watts - 220 - 240 volts single phase

Options

  • Fume extraction
  • RF10 Fine Jewellery brazing torch
  • 300mm revolving brazing table
  • Brazing kit

Standard Equipment (Forging)

  • Push-button no-volt release starter
  • Ceramic hearth
  • Automatic safety check of controls and air fan
  • Full manual control of hearth conditions
  • Whisper quiet air blower fan
  • Indicator status lights
  • Gas non-return valve
  • 12.5kg of ceramic chippings
  • Operation/Instruction manual
  • Side and rear heat shields
  • Rake iron

Standard Equipment (Brazing)

  • 2 asbestos-free heat resistant refractory hearths
  • 4 full size Heat Reflective Blocks
  • 8 half size Heat Reflective Blocks
  • Push-button no-volt release starter
  • 2 RF80 brazing torches
  • Colour coded reinforced gas and air hoses
  • Whisper quiet air blower fan
  • Push button electronic ignition
  • Auto gas leak proving system on start up
  • Indicator status lights
  • Gas non-return valve
  • Operation/Instruction manual

Case Studies

Extras

Need some help?

Contact Information

Request for:

Interested in:

Message:

Contact Details

Flamefast UK Ltd

If you need more information or require a quote please contact us, we will be happy to assist...

Warrington / Head Offices

Telephone 01925 281230
Fax 01925 852785

Email sales@flamefast.co.uk
Address Unit 1, Heaton Court, Birchwood, Warrington, Cheshire, WA3 6QU

Workshop Solutions

Workshop Solutions

Hot Metal & Foundry Equipment

Hot Metal & Foundry Equipment

Workshop Service & Maintenance

Workshop Service & Maintenance