Designed for use in well ventilated areas, the LN2000 runs on natural gas or bottled gas (LPG). The flush fitting chamber-sized door permits full use of all of the chamber volume.
The LN2000 can be used for:
The LN2000 is ideal for glazing small single items of pottery. Glazing is usually done at just over 1000°C. Decorating pottery before glazing is difficult as many of the colours used will not stand up to the high temperatures used in glazing. Most decorating is done after glazing and then re-glazed and enamel fired at around 750°C.
Designed for the professional or student enameller, the fast heat up times allow enamelling to begin within 10 minutes. Large capacity and even heat distribution allow larger objects to be enamelled. The top outer casing of the kiln heats up sufficiently to enable the drying of enamels to be carried out.
Metal Heat Treatment
The LN2000 is ideal for heat treatment, hardening, case hardening and tempering of tools and components. The kiln's maximum temperature of over 1100°C quickly melts small quantities of metal e.g. aluminium and brass.
Superb for the investment casting process, the kiln provides good capacity and a clean burn with excellent ventilation. The heat control valve provides controlled even heat up to 1100°C.
Melting Precious Metals
The LN2000 is ideal for melting small amounts of precious metals in a short space of time. A solid refractory base tile easily accommodates a large range of metal melting crucibles for gold, silver and other precious metals.
The LN2000 is a good general semi muffle gas fired kiln which provides controlled heat up to a maximum temperature in excess of 1100°C in 30 minutes.
A multi-purpose gas fired kiln that is safe, clean, fast with controllable temperature. The LN2000 is ideal for gold casting (inlays and dentures); heating rings for porcelain bonding to gold and non-precious alloys and cobalt chrome dentures.
*Picture is for reference only and may differ from the final product