RoboxPro - 3D Printer

Benefits

• Needle valve nozzle technology for superior dual extrusion printing
• Professional build volume of 210 x 300 x 400 mm
• Upgradeable print-heads for extended and enhanced capabilities
• Integrated 5” touch-screen interface with wireless connectivity
• HEPA filter and active charcoal air purification system
• Climate-controlled build chamber with locking door
• Interchangeable, hassle-free build plate - no glue or tape required
• Web access with real-time monitoring and alerts
• SmartReel® technology for automatic print settings and costings
• Streamlined work-flow with intuitive AutoMaker® software
• Adaptive bed levelling and fully automatic hardware calibrations
• Flexible build plate with magnetic fittings for easy removal of parts

New SingleX™ Head

Where our smaller Robox is able to print just about everything, RoboxPRO is best suited for large structural parts. Continuing this thinking we wanted to offer users the ability to print with abrasive filled materials such as glass filled nylon and carbon filled materials which can provide better stability during print and other nice features. For this reason RoboxPRO comes as standard with a SingleX head fitted with an Olsson Ruby 0.6mm nozzle. SingleX heads use a standard retract to control flow instead of a valve and have a standard M6 nozzle thread.

RoboxPRO is compatible with all HeadLock® heads.

Touchscreen and remote access

A built in Mote allows print monitoring and remote access via your local network. Connect via ethernet or wifi on your computer or via a smartphone.

Huge build volume

210 x 300mm print surface with 400mm of build height gives space for very large parts in a single build. This combined with the huge savings in time and consumables provided by the unique material change in our unbeatable DualMaterial head means no wasted material in purge towers and ridiculous dribble bins.

The reels and feed tubes are contained within the volume of the product, not hidden around the back, sticking out the top or ignored in the dimensions.

HEPA Filtration and Safety Features

Replaceable HEPA filters reduce the effect of smell and contamination of your work environment.

With safety features switched on the door will remain locked until the parts inside are stationary and the surface temperatures have dropped to a safe level. There is also a key for easy access and to keep the curious safe.

3 print heads included

RoboxPro is compatible with all HeadLock™ print heads so they are backwards compatible with previous Robox printers. The 3 included heads allow unique benefits and material compatibility far beyond any Robox competitors. No tools are required to change heads, there is a simple thumbwheel behind the head. New heads are in development and will further increase the functions of Robox printers.

QuickFill™ - 0.3 & 0.8mm valved nozzles with a single material feed. Perfect for high detail or high speed prints in a huge range of materials.

DualMaterial™ - Two 0.4mm valved nozzles with two material feeds. Easily the best dual extrusion system, ideal for models needing support structures.

SingleX™ - 0.6mm Olsson Ruby nozzle with a single retraction feed. Back to basics to allow the benefits of abrasive materials on Robox platforms.

Use any material!

There is no manufacturer lock in or hacking required to use practically any 1.75mm filament available. We encourage experimentation by knowledgeable and experienced users and offer advice and tested print profiles via the Robox Community. By enabling the Advanced Mode you can edit the SmartReel profiles and create your own, you can save these to reels or simply feed material in directly from its original reel, just tell AutoMaker what it is via a custom print profile, SmartReel just makes it easier. The warranty terms require that you take responsibility for damage from third party filament. “Filled” filaments which will abrade surfaces are not recommended on some heads.

Dimensions

Build Size (L x W x H) - 210 x 300 x 400 mm

Total Size (L x W x H) - 510 x 510 x 610 mm

Filament Diameter - 1.75mm +/- 0.05 mm

Print Technology

Fused Filament Fabrication (FFF)

Layer Resolutions

50 to 500 microns / 0.05 to 0.5 mm

Professional - 100 microns / 0.1 mm

Standard - 200 microns / 0.2 mm

Fast - 300 microns / 0.3 mm

Temperatures

Nozzles - up to 300°C

Bed - up to 150°C

Model Materials

ABS, PETG, PC, Nylon, PVOH
Filled materials such as carbon and glass filled when using SingleX head

Interface

Desktop/laptop, mobile & on-board

Head Nozzle Diameter

QuickFill™ – 0.3mm & 0.8 mm – Up to 300°C

DualMaterial™ – 0.4 mm & 0.4 mm – Up to 300°C

Single™ – 0.6mm Olsson Ruby nozzle, retraction – Up to 300°C

Other heads – coming soon

Connectivity

Wi-Fi, USB stick & Ethernet

Air Filatration

HEPA & active charcoal air filatration

Support Materials

Soluble & breakaway

Software Bundle

Robox Automaker®

File Types

.stl, .obj

Software Compatibility

Windows 7+, MacOs X 10.6+ and Ubuntu Linux 12.04+

DryBox

The optional DryBox filament locker is a perfect match for RoboxPRO and a great addition to any 3D printer. Keep your valuable filament in excellent condition in this humidity controlled lockable cabinet. Filament feeds out of dedicated tubes at the rear and directly into the extruders.