Flamefast Safety Tilt Crucible Furnace - CM450
This easy to use furnace is ideal for fast melts of aluminium. The unit incorporates the Flamefast tilt and pour principle, which ensures safer metal pouring and extended crucible life. Natural Draft & safety tilt
Top Key Features
- Piezo ignition and flame failure device
- Super efficient insulation
- ATP10 capacity crucible pot
- Crucible lid
- Tilt handle
- Pouring gauge
- UK Manufactured
Overview
This easy to use furnace is ideal for fast melts of aluminium. The unit incorporates the Flamefast tilt and pour principle, which ensures safer metal pouring and extended crucible life.
If required, the drum assembly can be detached and carried to the mould using the Combined Lifting and Pouring Tools which are supplied as optional extras.
Key Features
- Piezo ignition and flame failure device
- Super efficient insulation
- ATP10 capacity crucible pot
- Crucible lid
- Tilt handle
- Pouring gauge
- Degassing plunger
- Skimming ladle/dross lifter
- Safety burner cut-out prevents burner from operating when the drum is tilted
- Operation/Instruction manual
- 2 year warranty
- UK Manufactured
Dimensions
| Width: | 450 mm |
|---|---|
| Height: | 330 mm |
| Depth: | 330 mm |
| Weight: | 20 kg |
Technical Specifications
| Electrical: | 240VAC 3A fused spur required for interlock solenoid only |
|---|---|
| Safety: | Fume Extraction is mandatory as per HSG258 / COSHH regulations Appropriate PPE must be warn at all times when operating equipment Safety burner cut-out Flame failure device |
| Temperature: | 950 °C (max) |
| Warranty: | 2 Years |
PLEASE STATE GAS TYPE WHEN ORDERING
IMPORTANT NOTICE: ACCORDING TO THE HEALTH & SAFETY AT WORK ACT 1974, BS 4163 AND COSHH REGULATIONS IT IS MANDATORY THAT ALL FUMES MUST BE REMOVED AT SOURCE.
Performance
| Gas Type | Rate | BTU / HRS | kW | Pressure |
| Natural gas | 0.94 m3/h | 34 500 | 10.1 | 20 mbar |
| Propane | 0.7 kg/h | 34 500 | 10.1 | 35 mbar |
| Butane | 0.68 kg/h | 34 500 | 10.01 | 28 mbar |
Â
Melting Times
| Typical melting times from cold | ||||
| Aluminium | 2.9 kg in 25 minutes | |||
Â
Melt times are based on Grade LM4 Aluminium and should range from 40 minutes to 60 minutes
Optional Extras
- Replacement ATP10 crucible pot and lid
- Raised sand tray, 1200 x 800 x 300 mm (no need for a casting pit)
- Face shield
- Heat resistant gloves
- Chrome leather leggings
- Chrome leather apron
- Combined lifting and pouring handles for multiple pours
- Hardware support casting kit
- Moulding Bench
- *Fume extraction to meet the requirements of COSHH Regulations
Â
*Fume extraction is mandatory as per HSG258/ COSHH regulations. Please contact us for advice and cost
-
Flamefast Melting Crucible Furnace - CRM700Specifically designed for use in education, the CRM700 Crucible Furnace is... - Flamefast Safety Tilt Crucible Furnace - CM450PBThe CM450PB is fitted with a high performance burner and control system...
- Flamefast Moulding BenchThis robustly made sand moulding bench is specifically designed for use in...
- Chip Forge & Double Brazing Hearth - DS430DWhen space is limited, the Flamefast Combined Ceramic Chip Forge and Double...
- Chip Forge & Brazing Hearth - DS430SThe DS430S complies with British Gas Standards and is a fully fail safe...
