Brazing Hearth Single - DS400S
The DS400S is supplied with an easy-to-use single valve controlled RF80 torch which allows one-hand operation. Supplied with a solid refractory hearth with robust side and rear heat shields, the DS400S complies with British Gas standards and is a fully fail safe system.
*Canopy & extraction optional, does not come as part of the unit
Top Key Features
- Asbestos free heat resistant refractory hearth, side and rear heat shields
- 5 Heat Reflective Blocks
- Push button no volt release starter
- Requires manual restart after power failure
- RF 80 brazing torch
- UK Manufactured
Overview
The DS400S is supplied with an easy-to-use single valve controlled RF80 torch which allows one-hand operation. Supplied with a solid refractory hearth with robust side and rear heat shields, the DS400S complies with British Gas standards and is a fully fail safe system.
All sequences are visually displayed using neon indicators. On start-up the gas train, hoses and torches are tested for escaping gas. Leaks from any component will result in a continuously illuminated red neon and the main flow of gas will be prevented from entering the system.
*Canopy & extraction optional, does not come as part of the unit
Key Features
- Asbestos free heat resistant refractory hearth, side and rear heat shields
- 5 Heat Reflective Blocks
- Push button no volt release starter
- Requires manual restart after power failure
- RF 80 brazing torch
- Colour coded reinforced gas and air hoses
- Whisper quiet air blower fan
- Push button electronic ignition.
- Auto gas leak proving system on start up
- Indicator status lights
- Gas non-return valve
- Operating /Instruction manual
- UK Manufactured
Dimensions
| Width: | 730 mm |
|---|---|
| Height: | 1195 mm (overall) |
| Depth: | 700 mm |
| Working Height: | 800 mm |
| Height with Canopy: | 1800 mm |
| Weight: | 122 kg |
Technical Specifications
| Electrical: | 120 Watts - 220-240 volt single phase |
|---|---|
| Extraction System: | Varivac Extraction |
| Noise Level: | Whisper quiet air blower |
| Safety: | Units must be installed & commissioned by Flamefast qualified engineers Appropriate PPE must be warn at all times when operating equipment Push button no volt release starter Manual restart after power failure Colour coded reinforced gas and air hoses |
| Warranty: | 2 Years |
PLEASE STATE GAS TYPE WHEN ORDERING
IMPORTANT NOTICE: ACCORDING TO THE HEALTH & SAFETY AT WORK ACT 1974, BS 4163 AND COSHH REGULATIONS IT IS MANDATORY THAT ALL FUMES MUST BE REMOVED AT SOURCE.
Performance
Forging Performance
| Gas Type | Rate | BTU / HRS | kW | Pressure |
| Natural gas | 2.18 m3/h | 80,000 | 23.5 | 20 mbar |
| Propane | 1.66 kg/h | 80,000 | 23.5 | 35 mbar |
| Butane | 1.70 kg/h | 80,000 | 23.5 | 28 mbar |
Â
Optional Extras
- RF10 fine jewellery torch
- Optional additional connection for second torch
- 300mm revolving brazing table
- *Fume extraction to meet HSG258 regulations
*Fume extraction is mandatory as per HSG258/ COSHH regulations. Please contact us for advice and cost
Varivac Extraction
The Varivac’s unique fume intake configuration captures all fumes and prevents any spillage. An electrical interlock prevents the use of linked equipment before the Varivac is switched ON.
Â
It can be fitted to existing equipment if required with a choice of low level or high rise exhaust outlets.
Â
To fit Varivac Extraction Place Varivac canopy around the outer rear top of the unit and bolt through the corresponding holes.
-
Double Brazing hearth - DS400DThe Flamefast DS400D double brazing hearth is identical to the DS400S single... - Chip Forge & Brazing Hearth - DS430SThe DS430S complies with British Gas Standards and is a fully fail safe...
- Chip Forge & Double Brazing Hearth - DS430DWhen space is limited, the Flamefast Combined Ceramic Chip Forge and Double...
- Flamefast Gas Torches - RF10 & RF80A range of single hand operated soldering and brazing torches developed for...
- Flamefast Gas Torches - T2 & T4Two torches are available, the T4 which is designed for heavy brazing and the...
