Jewellery Benches EM221 & EM222
The Flamefast jewellery benches can be supplied in both double and single station configurations and come as a complete unit with integral air blower, integrated circulatory extraction system, gas proving detection, bench top lighting and two Flamefast RF10 torches.
Top Key Features
- x2 RF10 jewellery torches with colour coded reinforced gas and air hoses
- Flexible approved gas hose for connection
- Integral HEPA extraction system
- Double solenoid and non-return valve fitted to gas inlet
- Gas/air manifolds rear and front
- UK Manufactured...
Overview
The Flamefast jewellery benches can be supplied in both double and single station configurations and come as a complete unit with integral air blower, integrated circulatory extraction system, gas proving detection, bench top lighting and two Flamefast RF10 torches. The only services required are a 240VAC 5 amp power supply and either a natural gas or LPG gas supply.
All benches are manufactured from 50mm thick solid beech. They operate with the unique RF10 Jewellery Torch, which automatically supplies the correct/air mixture with the turn of one single control valve. This is convenient to any operator but will give confidence to younger students in particular, enabling them to produce a higher standard of work in a shorter time.Â
Quietness of operation is essential when instructing young student and in the professional environment. Flamefast benches are fitted with ‘whisper quiet’ blower fan, which is specially designed to provide combustion air for the soldering torches.
Key Features
- x2 RF10 jewellery torches with colour coded reinforced gas and air hoses
- Flexible approved gas hose for connection
- Integral HEPA extraction system
- Double solenoid and non-return valve fitted to gas inlet
- Gas/air manifolds rear and front
- Bench top lighting
- Blower Fan - single phase
- Torch support stand to suit
- No volt starter
- Self ignition system fitted
- Incorporates gas proving system, interlocked with integral extraction
- Integrated extraction system
- UK Manufactured
Dimensions
Width: | 1810 mm |
---|---|
Height: | 70 mm (stand up) |
Depth: | 600 mm |
Working Height: | 950 mm |
Weight: | 83 kg |
Technical Specifications
Electrical: | 5 amp, 220 - 240 volt single phase, 50Hz |
---|---|
Frame Material: | 50 mm Solid beech timber |
Extraction System: | Integral HEPA extraction system |
Safety: | |
Warranty: | 2 Years |
IMPORTANT NOTICE: ACCORDING TO THE HEALTH & SAFETY AT WORK ACT 1974, BS 4163 AND COSHH REGULATIONS IT IS MANDATORY THAT ALL FUMES MUST BE REMOVED AT SOURCE.
Performance
Gas Type | Rate | Pressure |
Natural gas | 0.54 m3/h | 20 mbar |
Propane | 0.42 kg/h | 35 mbar |
Butane | 0.42 kg/h | 28 mbar |
Â
Optional Extras
- Carton on 10 or 20 heat reflective block
- Wheelchair access option available
- Single station available
- Compressed air optional
Designed to provide safe working tools and materials for use with Flamefast Gas Equipment. Available in kits or as individual items.